WTaylor05: Step One: The fuckin easiest step is done in MULTI TRACK mode. To the left of your screen in the first TRACK, essenstially the place MOST people INSERT their INSTRUMENTAL before they record, above where u see the words "TRACK 1" you should see 3 small BLOCKS. They say "Vol," "EQ," and "BUS." CLICK on the "EQ."
WTaylor05: Step Two: We're now going to ANALOG (which means manually) make a preset that you can adjust once u put in my preset to your own perameters once finished. You should see a grey box that says Eq/A, V 0, Pan 0, H 0, M 0, and L 0. DOUBLE click either the H, M, or L (it doesnt matter which one).
WTaylor05: Step Three: This shouldve brought up a box that at the top reads "Track Equalizers." If not, turn off ur computer, open ur window, and drop it out. Now, once you have reach this screen you SHOULD see a lil level diagram with THREE WHITE BALLS in it (dont make any jokes lol). Now below that Diagram, to the left, you'll see Lo, Mid, and Hi (in order from top to bottom, we hope). To the right of that should be a a GREY and RED colored sliding bar that u can adjust, but dont do it or else I'll break ur fuckin nose. Now to the RIGHT of that should be NEON GREEN numbers. Those are your preset FREQUENCIES for each set of levels (Hi, Mid, Lo).
WTaylor05: Step Four: Now, on the Lo, Change it to 160 (mine are preset so if ur already set @ 160, congratulations). On the Mid, set it at 2500. And for the Hi, Change it to 7000, BUT DONT CLOSE THIS SCREEN YET. If you look towards the top right you should see a verticle set of sliding bars in the order from LEFT TO RIGHT that read, Lo, Mid, Hi (hey hey! the same as before). Below them once again should be NEON GREEN NUMBERS that are still set at 0. For the Lo, put it at 3.3. For the Mid, put it at -2.4. And for the Hi, Set it at 4.0. Now if u have a deep voice u might want ur Lo @ like 1.2 and ur Hi about the same, and if youre a HIGH PITCHED person like me, u wanna do the opposite and have ur Lo raised to about 3.3-3.8 just to give ur voice a lil depth. BUT DONT CLOSE THIS SCREEN YET or im gonna have Kirpatrick here punch u in the stomach.
WTaylor05: Step Five: Ok just fucking with you, once u have all those PRESETS I gave you punched in, feel free to hit the X at the top of that little box. Now, back where u see Vol, EQ and BUS, there should be all the presets u put in just below. NOW TO INSURE WE DONT LOSE these, go ahead and RIGHT CLICK on the Eq/A. A small box should pop up that reads, EQ Presets, inside it to the bottom u should see "ADD NEW." CLICK IT. Now title this preset "NTL's Hung" or whatever you want . NOW if you ever want to use that preset again, RIGHT CLICK THE Eq/A Box, and then find ur PRESET which u titled, and click it. NOW, initially the PRESETS WONT SHOW UP. So now you LEFT CLICK on the Eq/A Box TWICE, and WALLA! Magically they appear.


it looks long but its not that hard barely anything to do but it will make you sounde better so are you ready to collab??????

__________________