There is a million things you can do for this ... but dont turn up you mic gain in your control panel to much then you will get a bad hiss... to correct that get a noise gate of some kind I use the Nady CL5000 and its cheap and has 3 machines in one ... so it also has a compresser and a limter on it too. bolth very usefull for alot of things. but just try bosting your mic level in your control panels but not to much... If you have a good noise gate plug in use that but use it very carefully as it could take out alot of the iflections in your voice.. so you can also use a bit of EQ'n to top FQ down a few noctchs and that sould help and a good mulit band compression and you should have some good thick and dynamic voices.. if you have any other questions about techecs and stuff just email me and we'll talk.. peace