RapVerse.com Community
 Phenom | Kingz | Dabatos | TonySelf | Tha Q | Half Breed | Tito | 7th End RV Radio  

Go Back   RapVerse.com Community > Back Stage > Tutorials
User Name
Password
FAQ Calendar Search Today's Posts Mark Forums Read

 
 
Thread Tools Search this Thread Display Modes
Prev Previous Post   Next Post Next
Old 10-17-05, 11:23 PM   #1
L.E
L.E
 
L.E's Avatar
 
Posts: 6,000
From: Edmonton, Alberta, Canada
Limited Edition's First Tutorial...Recording With A Shitty-Ass Mic With Good Quality

IP:

Somebody put this in Tutorials.

Thanks Nos.

Okay...this is my first tutorial. I'm gonna show you how to take a regular, desktop mic that you bought at Radio Shack for fifteen bucks into a decent recording mic.

NOTE: IF YOU DO NOT HAVE COOL EDIT PRO OR AUDOBE AUDITION THIS TUTORIAL IS USELESS TO YOU.

Step 1:

Okay...now your gonna have to do a little riggin up. I took the top cone part off of a broken dynamic mic, stuffed Kleenex into it, fit it over the stick mic, and taped it on. I am dead serious. Make sure it's secure enough so that it won't fall off.

EDIT: Ghost pointed out if you couldn't get the piece off of a dynamic mic. You can use a sock with kleenex in it. Same effect.

Step 2:

Okay...make sure you have your headphones on so you do not get any feedback from the speakers. This helps a lot...trust me. Record your verse. And the next thing you do, trim the vocals until you just have the verse perfectly carved out. This removes excess background noice before your verse and after.

Step 3:

Okay...you have trimmed your verse. Next, go into the single track editor, select all, and then go into effects. Select Noise Reduction, and scroll down to Noise Reduction. Get a profile of the noise in the vocals, and then put the Noise Reduction Level at 1. Hit Ok.

Step 4:

Next, go into Effects, then Filters. Go into Graphics Equalizer, and then select "Spit Clear." After that, go into Filters again, and then select FFT Filter. Select "Gentle and Wide." After that go into Filters YET AGAIN and select Parametric Equalizer, and select "Hum and Hiss Removal." By now, your vocals should be sounding decent by now.

Step 5:

The next thing you do is simple: Go into Effects, Delay Effects, Reverb. Then you simply select Vocal- Natural Reverb. Your done for this step.

Step 6:

Now this step relies entirely on your voice, but this is what I did for my voice: I went into the multitrack editor, select the EQ tab over the volume control. In the track that has your vocals, I set the EQ's as this: H- 11.0 M- 1.1 L- 2.2. Set the vocals volume so its equal with the beat.

And BAM! Your done.

Listen to One Son's Symphony on my page:

www.soundclick.com/limitededitioncan

I used the exact same steps I displayed here.

So there ya go...it's not quite as good as big expensive mics, but it's a lot better than the level of quality your at right now.

Enjoy.
__________________
Soundclick
NEW Myspace

Last edited by Limited Edition : 10-18-05 at 12:34 AM.
Send a message via AIM to L.E Send a message via MSN to L.E  
 


Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump



All times are GMT -4. The time now is 11:00 AM.

Powered by vBulletin.
Copyright © 2000-2004 Jelsoft Enterprises Ltd.